Publication

▼2023

• A. Taketoshi, Y. Gangarajula, R. Sodenaga, A. Nakayama, M. Okumura, N. Sakaguchi, T. Murayama, T. Shimada, S. Takagi, M. Haruta, B. Qiao, J. Wang, T. Ishida
  “Gold/Substituted Hydroxyapatites for Oxidative Esterification: Control of Thin Apatite Layer on Gold Based on Strong Metal–Support Interaction (SMSI) Results in High Activity”
  ACS Applied Materials & Interfaces, Vol. 15, pp. 34290-34302 (2023).
• A. Takahashi, A. Nakayama, T. Murayama, N. Sakaguchi, T. Shimada, S. Takagi, T. Ishida
  “Au Clusters Supported on Defect-Rich Ni-Ti Oxides Derived from Ultrafine Layered Double Hydroxides (LDHs) for CO Oxidation at Ambient Temperature”
  Catalysts, Vol. 13, pp. 1155 (2023).
• Y. Tanuma, T. Knaflič, B. Anézo, C. Stangel, J. Volkmann, N. Tagmatarchis, H. A. Wegner, D. Arčon, C. P. Ewels
  “Long Spin Coherence Times on C₅₉N-C₆₀ Heterodimer Radicals Entrapped in Cycloparaphenylene Rings”
  The Journal of Physical Chemistry C, Vol. 127, pp. 6552-6561 (2023).
• G. Saito, N. Sakaguchi, K. Matsuura, T. Sano, T. Yamaoka
  “Effects of Normalizing Temperature on the Precipi-tation of Fine Particles and Austenite Grain Growth during Carburization of Al- and Nb-Microalloyed Case-Hardening Steel”
  ISIJ International, Vol. 63, pp. 727-736 (2023).

▼2021

• K. Tanahashi, Y. Omura, H. Naya, K. Miyazaki, G. Saito, Y. Kunisada, N. Sakaguchi, T. Nomura
  “Sr-Doped Ca₂AlMnO_5+δ for Energy-Saving Oxygen Separation Process”
  ACS Sustainable Chemistry & Engineering, Vol. 9, pp. 9317-9326 (2021).
• G. Saito, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, T. Yamaoka
  “Effects of Cooling Rate after Hot Forging on Precipitation of Fine Particles during Subsequent Normalizing and Austenite Grain Growth during Carburization of Al- and Nb-microalloyed Case-hardening Steel”
  ISIJ International, Vol. 61, pp. 1964-1970 (2021).
• T. Takahashi, H. Koide, H. Sakai, D. Ajito, A. Kurniawan, Y. Kunisada, T. Nomura
  “Catalyst-loaded micro-encapsulated phase change material for thermal control of exothermic reaction”
  Scientific Reports, Vol. 11, pp. 7539 (2021).
• R. Sugimoto, Y. Segawa, A. Suzuta, Y. Kunisada, T. Uchida, K. Yamazaki, K. Gohara
  “Single Pt Atoms on N-Doped Graphene: Atomic Structure and Local Electronic States”
  The Journal of Physical Chemistry C, Vol. 125, pp. 2900–2906 (2021).
• Y. Inomata, H. Kubota, S. Hata, E. Kiyonaga, K. Morita, K. Yoshida,
  N. Sakaguchi, T. Toyao, K. Shimizu, S. Ishikawa, W. Ueda, M. Haruta, T. Murayama
  “Bulk tungsten-substituted vanadium oxide for lowtemperature
  NO_x removal in the presence of water”
  Nature Communications, Vol. 12, pp. 557 (2021).
• G. Saito, T. Zhang, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, T. Yamaoka
  “In-situ observation of abnormal grain growth in a low-alloyed carbon steel using SEM-EBSD”
  Materialia, Vol. 15, pp. 100985 (2021).
• A. Sato, G. Saito, K. Abe, Y. Kunisada, N. Sakaguchi, T. Akiyama, T. Nomura
  “Rapid oxygen storage and release with Brownmillerite-structured Ca₂AlMnO₅“
  Journal of Alloys and Compounds, Vol. 851, pp. 156817 (2021).
• S. Hoshika, S. Ting, Z. Ahmed, F. Chen, Y. Toida, N. Sakaguchi, B. Van Meerbeek, H. Sano, S. K. Sidhu
  “Effect of conditioning and 1 year aging on the bond strength and interfacial morphology of glass-ionomer cement bonded to dentin”
  Dental Materials, Vol. 37, pp. 106-112 (2021).

▼2019

• 柴山 環樹, 松尾 保孝, Agus Subagyo, 坂口 紀史, 渡辺 精一
  “先進ナノ構造・状態解析共用拠点（北海道大学）”
  まてりあ, Vol. 58, pp. 758-762 (2019).
• G. Saito, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, T. Yamaoka
  “Effects of Fine Precipitates on Austenite Grain Refinement of Micro-alloyed Steel during Cyclic Heat Treatment”
  ISIJ International, Vol. 59, pp. 2098-2104 (2019).(open access)
• G. Saito, T. Nakayama, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, T. Yamaoka
  “Austenite memory during reverse transformation of steels at different heating rates”
  Materialia, Vol. 7, pp. 100409 (2019).
• S. Furukawa, P. Yi, Y. Kunisada, K. Shimizu
  “Extraordinarily Large Kinetic Isotope Effect on Alkene Hydrogenation over Rh-based Intermetallic Compounds”
  Science and Technology of Advanced Materials, Vol. 20, pp. 805-812 (2019).(open access)
• 長谷川瞬，國貞雄治，坂口紀史
  “グラフェン上での金属原子吸着状態の理論的研究”
  表面と真空, Vol. 62, pp. 344-349 (2019).
• S. Hasegawa, Y. Kunisada, N. Sakaguchi
  “Exploration of Long-Life Pt/Heteroatom-Doped Graphene Catalysts in Hydrogen Atmosphere”
  ACS Omega, Vol. 4, pp. 6573-6584 (2019). (open access)




• N. Sakaguchi, S. Matsumoto, Y. Kunisada, M. Ueda
  “Interaction of Localized Surface Plasmons of a Silver Nanosphere Dimer Embedded in a Uniform Medium: STEM-EELS and DDA Simulation”
  The Journal of Physical Chemistry C, Vol. 123, pp. 6735-6744 (2019).
• E. Hirata, M. Yudasaka, N. Ushijima, N. Sakaguchi, Y. Maeda, T. Tanaka, H. Kataura, A. Yokoyama
  “Fate of Carbon Nanotubes Locally Implanted in Mice Evaluated by Near-Infrared Fluorescence Imaging: Implications for Tissue Regeneration”
  ACS Applied Nano Materials, Vol. 2, pp. 1382-1390 (2019).
• Y. Sekio, N. Sakaguchi
  “Effect of Nickel Concentration on Radiation-Induced Diffusion of Point Defects in High-Nickel Fe–Cr–Ni Model Alloys during Neutron and Electron Irradiation”
  Materials Transactions, Vol. 60, pp. 678-687 (2019).(open access)
• H. Sasaki, G. Saito, N. Sakaguchi, R. Ota, H. Takahashi
  “Crystalline Evaluation of Size-Controlled Silicon and Silicon Oxide Nanoparticles Produced by Solution Plasma Discharge”
  Materials Transactions, Vol. 60, pp. 688-692 (2019).(open access)
• T. Watanabe, Y. Kunisada, N. Sakaguchi
  “Hydrogen isotope absorption in unary oxides and nitrides with anion vacancies and substitution”
  ChemPhysChem, Vol. 20, pp. 1369-1375 (2019).(open access)
• Y. Kunisada, G. Saito, K. Hayami, T. Nomura, N. Sakaguchi
  “Sr Substitution Effects on Atomic and Local Electronic Structure of Ca₂AlMnO_5+δ”
  Surface and Interface Analysis, Vol. 51, pp. 65-69 (2019).
  HUSCAP.(open access, author version)
• G. Saito, Y. Kunisada, T. Watanabe, X. Yi, T. Nomura, N. Sakaguchi, T. Akiyama
  “Combustion synthesis of AlN doped with carbon and oxygen”
  Journal of the American Ceramic Society, Vol. 102, pp. 524-532 (2019).(open access)
• H.Ikeda, M. Iwai, D. Nakajima, T. Kikuchi, S. Natsui, N. Sakaguchi, R. O. Suzuki
  “Nanostructural characterization of ordered gold particle arrays fabricated via aluminum anodizing, sputter coating, and dewetting”
  Applied Surface Science, Vol. 465, pp. 747-753 (2019).

▼2017

• T. Sugimoto, Y. Kunisada, K. Fukutani
  “Inelastic Electron Tunneling Mediated by Molecular Quantum Rotator”
  Physical Review B, Vol. 96, pp. 241409(R) (2017).
• 青木芳尚，倉千晴，國貞雄治，朱春宇，幅崎浩樹
  “窒化チタン微結晶膜におけるヒドリドイオン伝導の発現とそれによる常温水素膜分離”
  真空技術協会誌，Vol. 132, pp. 32-41 (2017).
• C. Kura, Y. Kunisada, E. Tsuji, C. Zhu, H. Habazaki, S. Nagata, M. Patrick Müller, R. A. De Souza, Y. Aoki
  “Hydrogen separation by nanocrystalline titanium nitride membranes with high hydride ion conductivity”
  Nature Energy, Vol. 2, pp. 786-794 (2017).
  日本語記事
• S. Hasegawa, Y. Kunisada, N. Sakaguchi
  “Diffusion of a Single Platinum Atom on Light-Element Doped Graphene”
  The Journal of Physical Chemistry C, Vol. 121, pp.17787-17795 (2017).
• G. Saito, Y. Kunisada, N. Sakaguchi, T. Nomuraa, T. Akiyama
  “Combustion synthesis of Ca-α-SiAlON:Eu²⁺ phosphors with different Ca concentrations and diluent ratios”
  Ceramics International, Vol. 43, pp. 12396-12401 (2017).
  HUSCAP.(open access, author version)
• N. Sakaguchi, F. Yamaki, G. Saito, Y. Kunisada
  “Estimating the Spatial Distribution of Ca Dopants in α-SiAlON by Statistical Analysis of HAADF-STEM Image”
  Materials Transactions, Vol. 58, pp. 1341-1345 (2017).(open access)
• 國貞雄治
  “計算科学的手法による氷表面上での水素分子の吸着特性の解明”
  Journal of the Vacuum Society of Japan, Vol. 60, pp.249-255 (2017). (依頼論文, oepn access)
• A. Hiranaka, X. Yi, G. Saito, J. Niu, T. Akiyama
  “Effects of Al particle size and nitrogen pressure on AlN combustion synthesis”
  Ceramics International, Vol. 43, pp.9872-9876 (2017).
• T. Igarashi, Z. Zhang, T. Haioka, N. Iseki, N. Hiyoshi, N. Sakaguchi, C. Kato, S. Nishihara, K. Inoue, A. Yamamoto, H. Yoshida, N. Tsunoji, W. Ueda, T. Sano and M. Sadakane
  “Synthesis of ε-Keggin-Type Cobaltomolybdate-Based 3D Framework Material and Characterization Using Atomic-Scale HAADF-STEM and XANES”
  Inorganic Chemistry, Vol. 56, pp.2042-2049 (2017)
• G. Saito, F. Yamaki, Y. Kunisada, N. Sakaguchi, T. Akiyama
  “Three-dimensional analysis of Eu dopant atoms in Ca-α-SiAlON via through-focus HAADF-STEM imaging”
  Ultramicroscopy, Vol. 175, pp.97-104 (2017).
  HUSCAP.(open access, author version)
• C. G. Han, C. Zhu, G. Saito, N. Sheng, T. Nomura, T. Akiyama
  “Enhanced cycling performance of surface-doped LiMn₂O₄ modified by a Li₂CuO₂-Li₂NiO₂ solid solution for rechargeable lithium-ion batteries”
  Electrochimica Acta, Vol. 224, pp. 71-79 (2017).
  HUSCAP.(open access, author version)
• G. Saito, Y. Kunisada, K. Hayami, T. Nomura, N. Sakaguchi
  “Atomic and local electronic structures of Ca₂AlMnO_5+δ as an oxygen storage material”
  Chemistry of Materials, Vol. 29, pp. 648-655 (2017).
  
• T. Nomura, N. Sheng, C. Zhu, G. Saito, D. Hanzaki, T. Hiraki, T. Akiyama
  “Microencapsulated phase change materials with high heat capacity and high cyclic durability for high-temperature thermal energy storage and transportation”
  Applied Energy, Vol. 188, pp. 9-18 (2017).
  

▼2015

• T. Ishimasa, S. Iwami, N. Sakaguchi, R. Oota, M. Mihalkovič
  “Phason space analysis and structure modelling of 100 Å-scale dodecagonal quasicrystal in Mn-based alloy”
  Philosophical Magazine, Vol. 95, pp. 3745–3767 (2015).
  HUSCAP.(open access, author version)
• D. Nakajima, T. Kikuchi, S. Natsui, N. Sakaguchi, R. O. Suzuki
  “Fabrication of a novel aluminum surface covered by numerous high-aspect-ratio anodic alumina nanofibers”
  Applied Surface Science, Vol. 356, pp. 54-62 (2015).
  HUSCAP.(open access, author version)
• T. Nomura, C. Zhu, N. Sheng, G. Saito, T. Akiyama
  “Microencapsulation of Metal-based Phase Change Material for High-temperature Thermal Energy Storage”
  Scientific Reports, (2015) Vol. 5 9117.(open access)
• G. Saito and T. Akiyama
  “Nanomaterial synthesis using plasma generation in liquid”
  Journal of Nanomaterials, Vol. 2015, 123696 (2015).(open access)
• G. Saito, Y. Nakasugi, N. Sakaguchi, C. Zhu, T. Akiyama
  “Glycine–nitrate-based solution-combustion synthesis of SrTiO3”
  Journal of Alloys and Compounds, Vol. 652, pp. 496-502 (2015).
• C. Han, C. Zhu, G. Saito, T. Akiyama
  “Improved electrochemical properties of LiMn2O4 with the Bi and La co-doping for lithium-ion batteries”
  RSC Advances, Vol. 5, pp. 73315–73322 (2015).(open access)
• T. Kikuchi, R. Ishida, S. Natsui, T. Kumagai, I. Ogino, N. Sakaguchi, M. Ueda, R. O. Suzuki
  “Carbon nanotube synthesis via the calciothermic reduction of carbon dioxide with iron additives”
  ECS Solid State Letters, Vol. 4, pp. M19-M22 (2015).(open access)
• Z. Zhang, T. Murayama, M. Sadakane, H. Ariga, N. Yasuda, N. Sakaguchi, K. Asakura, W. Ueda
  “Ultrathin inorganic molecular nanowire based on polyoxometalates”
  Nature Communications, Vol. 6 (2015).(open access)
• C. Zhu, G. Saito, T. Akiyama
  “Urchin-like hollow-structured cobalt oxides with excellent anode performance for lithium-ion batteries”
  Journal of Alloys and Compounds , Vol. 646, pp. 639-646 (2015).
• G. Saito, Y. Nakasugi, T. Akiyama
  “Generation of solution plasma over a large electrode surface area”
  Journal of Applied Physics, Vol. 118, pp. 023303 (2015).
  HUSCAP.(open access, author version)
• Y. Kunisada and H. Kasai
  “Hindered Rotational Physisorption States of H₂ on Ag(111) Surfaces ”
  Physical Chemistry Chemical Physics, Vol. 17 pp. 19625-19630 (2015).(open access)
• 國貞雄治，坂口紀史
  “fcc鉄(111)表面近傍での空孔形成における水素原子の影響”
  日本金属学会誌, Vol. 79 pp. 447-451 (2015).(open access)
• G. Saito and N. Sakaguchi
  “Solution plasma synthesis of Si nanoparticles”
  Nanotechnology, Vol. 26, pp. 235602 (2015).
  HUSCAP.(open access, author version)
• Y. Nakasugi, G. Saito, T. Yamashita, N. Sakaguchi, T. Akiyama
  “Solution plasma synthesis of Au nanoparticles for coating titanium dioxide to enhance its photocatalytic activity”
  Thin Solid Films, Vol. 583, pp. 135–141 (2015).
• T. Takeshima, Y. Tada, N. Sakaguchi, F. Watari, B. Fugetsu
  “DNA/Ag Nanoparticles as Antibacterial Agents against Gram-Negative Bacteria”
  Nanomaterials, Vol. 5, pp. 284-297 (2015).(open access)
• Y. Sekio, S. Yamashita, N. Sakaguchi, H. Takahashi
  “Void denuded zone formation for Fe–15Cr–15Ni steel and PNC316 stainless steel under neutron and electron irradiations”
  Journal of Nuclear Materials, Vol. 458, pp. 355-360 (2015).
• N. Sakaguchi, M. Kozuka, H. Ichinose
  “Laser-assisted sample preparation of silicon for high-resolution transmission electron microscopy”
  Microscopy, Vol. 64, pp. 111-119 (2015).

▼2013

• 坂口紀史，渡辺圭，國貞雄治
  “Pd/ZnO極性界面のHRTEM・EELSに基づく構造評価と第一原理電子状態計算”
  顕微鏡, Vol. 48, pp. 195-200 (2013).(open access)
• N. Sakaguchi, Y. Ohguchi, T. Shibayama, S. Watanabe, H. Kinoshita
  “Surface cracking on Σ3, Σ9 CSL and random grain boundaries in helium implanted 316L austenitic stainless steel”
  Journal of Nuclear Materials, 432: 23-27 (2013)
  HUSCAP.(open access, author version)
• N. Sakaguchi, M. Endo, S. Watanabe, H. Kinoshita, S. Yamashita, H. Kokawa
  “Radiation-induced segregation and corrosion behavior on Σ3 coincidence site lattice and random grain boundaries in proton-irradiated type-316L austenitic stainless steel”
  Journal of Nuclear Materials, 434: 65-71 (2013)
  HUSCAP.(open access, author version)
• T. Fujii, M. Arita, K. Hamada, Y. Takahashi, N. Sakaguchi
  “In-situ transmission electron microscopy of conductive filaments in NiO resistance random access memory and its analysis”
  Journal of Applied Physics, 113:083701-1-083701-7 (2013)
• S. Yatsu, H. H. Takahashi Sasaki, N. Sakaguchi, K. Ohkubo, Y. Muramoto, S. Watanabe
  “Fabrication of nanoparticles by electric discharge plasma in liquid”
  Archives of Metallurgy and Materials, 58: 425-429 (2013).(open access)
• A. Hamaya, T. Horiuchi, Y. Oohira, S. Minamoto, S. Miura, N. Sakaguchi
  “Experimental study on phase equilibria in the vicinity of X, W and H phase in the Mg-Zn-Y ternary system”
  Materials Transactions, 54: 641-646 (2013).(open access)

▼2011

• N. Sakaguchi, M. Miyake, S. Watanabe, H. Takahashi
  “EELS and ab-initio study of faceted CSL boundary in silicon”
  Materials Transaction, 52: 276-279 (2011).(open access)
• C. Zhu, N. Sakaguchi, S. Hosokai, S. Watanabe, T. Akiyama
  “In situ transmission electron microscopy observation of the decomposition of MgH₂ nanofiber”
  International Journal of Hydrogen Energy, 36: 3600-3605 (2011)
• K. Watanabe, N. Sakaguchi, S. Watanabe
  “Formation of sphalerite and wurtzite ZnO in Pd–Zn alloy after internal oxidation at elevated temperatures”
  Journal of Materials Science, 46: 4568-4573 (2011)
• M. Sekine, N. Sakaguchi, M. Endo, H. Kinoshita, S. Watanabe, H. Kokawa, S. Yamashita, Y. Yano, M. Kawai
  “Grain boundary engineering of austenitic steel PNC316 for use in nuclear reactors”
  Journal of Nuclear Materials, 414: 232-236 (2011)
  HUSCAP.
• Y. Yoshida, N. Sakaguchi, S. Watanabe, T. Kato
  “Self-organized two-dimensional vidro-nanodot array on laser-irradiated Si surface”
  Applied Physics Express, 4: 055202-1-055202-3 (2011)
• H. Habazaki, S. Koyama, Y. Aoki, N. Sakaguchi, S. Nagata
  “Enhanced capacitance of composite anodic ZrO₂ films comprising high permittivity
  oxide nanocrystals and highly resistive amorphous oxide matrix”
  ACS Applied Materials & Iinterfaces, 3: 2665-2670 (2011)
• Z. Yang, N. Sakaguchi, S. Watanabe, M. Kawai
  “Dislocation Loop Formation and Growth under In Situ Laser and/or Electron Irradiation
  Scientific Reports”
  Scientific Reports, 1: 190 (2011)(open access)

▼2009

• M. Sadakane, K. Yamagata, K. Kodato, K. Endo, K. Toriumi, Y. Ozawa, T. Ozeki, Y. Matsui, N. Sakaguchi, W. D. Pyrz, D. J. Buttrey, D. A. Blom, T. Vogt, W. Ueda
  “Synthesis of Orthorhombic Mo-V-Sb Oxide Species by Assembly of Pentagonal Mo6O21 Polyoxometalate Building Blocks”
  Angew. Chem. Int. Ed., 48: 3782-3786 (2009)
• N. Sakaguchi, F. Watari, A. Yokoyama, Y. Nodasaka, H. Ichinose
  “Low-voltage and high-voltage TEM observations on MWCNTs of rat in vivo”
  Bio-Medical Materials and Engineering, 19: 93-99 (2009)
• Y. Sekito, S. Miura, K. Ohkubo, T. Mohri, N. Sakaguchi, S. Watanabe, Y. Kimura, Y. Mishima
  “Effect of growth rate on microstructure and microstructure evolution of directionally solidified Nb-Si alloys”
  MRS Symposium Proceedings Volume 1128, Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, edited by M. Palm, B.P. Bewlay, M. Takeyama, J.M.K. Wiezorek, Y-H. He, 1128-U05-38 (2009)

▼2007

• N. Sakaguchi, H. Ichinose, S. Watanabe
  “Atomic Structure of Faceted Σ3 CSL Grain Boundary in Silicon: HRTEM and Ab-initio Calculation”
  Materials Transaction, 48: 2585-2589 (2007).(open access)
• K. Shiramine, S. Muto, T. Shibayama, N. Sakaguchi, H. Ichinose, T. Kozaki, S. Sato, Y. Nakata, N. Yokoyama, M. Taniwaki
  “Tip Artifact in Atomic Force Microscopy Observations of InAs Quantum Dots Grown in Stranski–Krastanow Mode”
  Journal of Applied Physics, 101: 033527-1-033527-5 (2007)
• H. Kinoshita, N. Sakaguchi, S. Watanabe, H. Takahashi, M. Kawai, R. Gotthardt, F. Phillipp
  “Formation of Al-Based Intermetallic Compound under Ion Implantation at Lower Temperature”
  Materials Science Forum 561-565: 1729-1732 (2007)
• H. Kinoshita, H. Takahashi, D. Gustiono, N. Sakaguchi, T. Shibayama, S. Watanabe
  “Ion implantation induced martensite nucleation in SUS301 steel”
  Materials Transaction, 48: 924-930 (2007).(open access)
• Y. Yano, T. Yoshitake, S. Yamashita, N. Akasaka, S. Onose, S. Watanabe, H. Takahashi
  “Effects of Fast Reactor Irradiation Conditions on tensile and Transient Burst properties of Ferritic/Martensitic Steel Claddings”
  Journal of Nuclear Science and Technology 44:1535-1542 (2007).(open access)

▼2005

• T. Li, G. Liu, X. Liu, B. Xu, H. Ichinose
  “Synthesis and Characteristics of Fe-encapsulating Onion-like Fullerenes”
  Transactions of Materials and Heat Treatment, 26: 28-30 (2005)
• T. Li, B. Xu, P. Han, Y. Zhang, X. Wang, X. Liu, H. Ichinose
  “CCVD preparation and morphology of onion-like fullerenes”
  New Carbon Materials, 20: 23-27 (2005)
• B. Xu, X. Liu, W. Liang, H. Ichinose
  “New Structured One-dimensional Material-nano Carbon Surpentine Tube”
  Transactions of Materials and Heat Treatment, 26: 10-14 (2005)
• B. Xu, P. Han, L. Wang, J. Li, X. Liu, M. Chen, H. Ichinose
  “Optical Properties in 2D Photonic Crystal Structure Using Fullerene and Azafullerene Thin Film”
  Optics Communications, 250:120-125 (2005)
• B. Xu, P. Han, J. Liang, X. Liu, H. Bao, T. Li, M. Chen, H. Ichinose
  “Theoretical Investigation of the Reflectivity of Fullerene-(C60, C70)/Aln Multi-layers in UV Region”
  Solid State Communications, 133: 353-356 (2005)
• X. Wang, B. Xu, X. Liu, H. Jia, H. Ichinose
  “Raman Spectrum of Nanostrutured Onion-like Fullerenes”
  Physica B, 357: 277-281 (2005)
• N. Sakaguchi, S. Watanabe, H. Takahashi
  “A new model for radiation-induced grain boundary segregation with grain boundary movement in concentrated alloy system”
  Journal of Materials Science, 40: 889-893 (2005)
• N. Sakaguchi, H. Takahashi, H. Ichinose
  “Influence of silicon and phosphorus on radiation-induced segregation of chromium and nickel in austenitic model alloys”
  Materials Transactions, 46: 440-444 (2005)(open access)
• B. Pal, T. Torimoto, K. Iwasaki, T. Shibayama, H. Takahashi, B. Ohtani
  “Synthesis of metal-cadmium sulfide nanocomposites using jingle-bell-shaped core-shell photocatalyst particles”
  journal of Applied Electrochemistry, 35: 751-756 (2005)
• B. Pal, T. Torimoto, S. Ikeda, T. Shibayama, K. Sugawara, H. Takahashi, B. Ohtani
  “Photocatalytic preparation of encapsulated gold nanoparticles by jingle-bell-shaped cadmium sulfide-silica nanoparticles”
  Topics in Catalysis, 35: 321-325 (2005)
• T. Watanabe, Y. Hosaka, E. Yamamoto, H. Ueda, K. Sugawara, H. Takahashi, K. Takehana
  “Control of the collagen fibril diameter in the equine superficial digital flexor tendon in horses by decorin”
  Journal of Veterinary Medical Science, 67: 855-860 (2005)(open access)

▼2003

• Y. Sueishi, N. Sakaguchi, T. Shibayama, H. Kinoshita, H. Takahashi
  “Radiation-induced segregation and precipitation behaviours around cascade clusters under electron irradiation”
  Journal of Electron Microscopy, 52, 63-68 (2003)
• D. Gustiono, N. Sakaguchi, T. Shibayama, H. Kinoshita, H. Takahashi
  “Nano-scale phase transformation in Ti-implanted austenitic 301 stainless steel”
  Journal of Electron Microscopy, 52, 449-453 (2003)

▼2001

• N. Sakaguchi, S. Watanabe, H, Takahashi
  “Heterogeneous dislocation formation and solute redistribution near grain boundaries in austenitic stainless steel under electron irradiation”
  Acta Materialia, 49, 1129-1137 (2001)
• N. Sakaguchi, T. Shibayama, H. Kinoshita, H. Takahashi
  “Atomistic observation of radiation-induced grain boundary movement in Fe-Cr-Ni alloy under electron irradiation”
  Philosophical Magazine Letters, 81, 691-696 (2001)
• S. Ohta, N. Sakaguchi, T. Shibayama, H. Talahashi
  “Direct observation of a Ti/Cu interface with atomic displacement under electron irradiation”
  Journal of Electron Microscopy, 203, 34-39 (2001)

▼1999

• N. Sakaguchi, S. Watanabe, H. Takahashi
  “Modeling of segregation and microstructural evolution near grain boundary in Fe-Cr-Ni alloy under irradiation”
  MRS Symposium Proceedings, Multiscale Modelling of Materials, 538, 169-178 (1999)
• S. Watanabe, N. Sakaguchi, H. Takahashi, S. Ohnuki
  “A composite model for segregation and microstructural evolution under electron irradiation”
  ASTM, Effects of Radiation on Materials STP, 1366, 1147-1158 (1999)
• S. Ohta, H. Takahashi, D. Goto, N. Sakaguchi
  “Nanoscale analysis of multilayer interface of W/Al₂O₃/Ti/Cu”
  Interface Science, 7, 191-196 (1999)
• S. Watanabe, N. Sakaguchi, S. Mochizuki, H. Takahashi
  “Defect-flow-induced heterogeneous dislocation formation and solute redistribution near a grain boundary in austenitic stainless steel under electron irradiation”
  Journal of Nuclear Materials, 271/272, 184-188 (1999)
• H. Kanda, H. Takahashi, N. Hashimoto, N. Sakaguchi
  “Effects of interaction between point defects and solutes on grain boundary segregation and migration”
  Materials Science Forum, 294-296, 157-160 (1999)

▼1996

• S. Watanabe, N. Sakaguchi, N. Hashimoto, M. Nakamura, H. Takahashi, C. Namba, N.Q. Lam
  “Radiation-induced segregation accompanied by grain boundary migration in austenitic stainless steel”
  Journal of Nuclear Materials, 232, 113-118 (1996)
• S. Watanabe, H. Tsuchida, Y. Hidaka, N. Sakaguchi, S. Ohnuki, H. Takahashi
  “Effect of additional elements on void nucleation in stainless steels during simultaneous irradiation with helium ions and electron”
  Journal of Nuclear Materials, 233/237(Pt A), 177-182 (1996)
• N. Sakaguchi, S. Watanabe, H. Takahashi
  “A computational study of dislocation evolution and radiation-induced segregation at a grain boundary”
  Journal of Nuclear Materials, 239, 176-179 (1996)
• S. Watanabe, J. Satou, N. Sakaguchi, H. Takahashi, C. Namba
  “Radiation-induced segregation at grain boundary in Fe-Cr-Ni alloy system: effect of temperature variation”
  Journal of Nuclear Materials, 239, 200-204 (1996)
• H. Kinoshita, S. Watanabe, S. Mochizuki, N. Sakaguchi, H. Takahashi
  “Effect of Ni and Cr concentration on grain boundary segregation in Fe-Cr-Ni alloy”
  Journal of Nuclear Materials, 239, 205-209 (1996)
• H. Takahashi, N. Sakaguchi, N. Hashimoto, S. Watanabe
  “Theoretical and experimental studies of irradiation-induced grain boundary migration depending on orientation”
  Materials Science Forum, 207-209, 561-564 (1996)
• S. Watanabe, N. Sakaguchi, S. Mochizuki, H. Takahashi
  “Theoretical prediction and direct observation of dislocation-free zone formation near a grain boundary in austenitic stainless steel under electron irradiation”
  Philosophical Magazine Letters, 74, 351-356 (1996)